ADuM360N Datasheet

• High common-mode transient immunity: 180 kV/μs typical
• High robustness to radiated and conducted noise
• Low propagation delay
  • 6.2 ns typical (10 ns maximum) for 5 V operation
• Low dynamic power consumption, <1.65 mA/ch at 1 Mbps
• 2.25 V to 5.5 V level translation
• 150 Mbps maximum guaranteed data rate for 5 V operation
• High temperature operation: 125°C
• 16-lead, RoHS compliant, QSOP package
• Safety and regulatory approvals
  • UL 1577
    • V_ISO = 3000 V_RMS for 1 minute
• • DIN EN IEC 60747-17
    • V_IORM = 636 V_PEAK
  • IEC/EN/CSA 62368-1
  • IEC/CSA 60601-1
  • IEC/CSA 61010-1
  • CQC GB 4943.1 (pending)
• ±8 kV IEC 61000-4-2 ESD protection across isolation barrier
• ±8 kV HBM ESD protection on input/output pins
• Fail-safe high (N1) or low (N0) options

• Serial-peripheral interface (SPI) data converter isolation
• RS-485 and controller area network with flexible data rate (CAN FD) industrial field bus isolation
• PWM controller signal isolation
• General-purpose multichannel isolation

The ADuM360N are 6-channel digital isolators based on Analog Devices, Inc., iCoupler^® technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and back-to-back monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and meet CISPR 32/EN 55032 Class B limits at 5 Mbps. The maximum propagation delay is 10 ns with a pulse-width distortion of less than 3 ns at 5 V operation. Channel matching is tight at 3.0 ns maximum.

The ADuM360N data channels are independent and are available in a variety of configurations with a withstand voltage rating of 3 kV rms (see Figure 20 in data sheet). The devices operate with the supply voltage on either side ranging from 2.25 V to 5.5 V, which provides compatibility with lower voltage systems as well as enabling voltage translation functionality across the isolation barrier.

Two different fail-safe options are available, by which the outputs transition to a predetermined state when the input power supply is not applied.