ADUM141E Datasheet

• High common-mode transient immunity: 100 kV/μs
• High robustness to radiated and conducted noise
• Low propagation delay
  • 13 ns maximum for 5 V operation
  • 15 ns maximum for 1.8 V operation
• 150 Mbps maximum guaranteed data rate
• Safety and regulatory approvals
  • UL 1577
    • V_ISO = 3000 V rms for 1 minute
  • IEC/EN/CSA 60950-1
  • IEC/CSA 60601-1
  • IEC/CSA 61010-1
  • CQC GB 4943.1
  • DIN EN IEC 60747-17 (VDE 0884-17)
    • V_IORM = 565 V peak
• Backward compatibility
  • ADuM141E1 pin-compatible with ADuM1401
• Low dynamic power consumption
• 1.8 V to 5 V level translation
• High temperature operation: 125°C
• Fail-safe high or low options
• 16-lead, RoHS compliant, SOIC package
• AEC-Q100 qualified for automotive applications

• General-purpose multichannel isolation
• Serial peripheral interface (SPI)/data converter isolation
• Industrial field bus isolation

The ADuM141E¹ is a quad-channel digital isolator based on Analog Devices, Inc., iCoupler^® technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler devices and other integrated couplers. The maximum propagation delay is 13 ns with a pulse width distortion of less than 3 ns at 5 V operation. Channel matching is tight at 3.0 ns maximum.

The ADuM141E data channels are independent and are available in a variety of configurations with a withstand voltage rating of 3.0 kV rms or 3.75 kV rms (see the Ordering
Guide). The devices operate with the supply voltage on either side ranging from 1.8 V to 5 V, providing compatibility with lower voltage systems as well as enabling voltage translation functionality across the isolation barrier.

Unlike other optocoupler alternatives, dc correctness is ensured in the absence of input logic transitions. Two different fail-safe options are available, by which the outputs transition to a predetermined state when the input power supply is not applied or the inputs are disabled. The ADuM141E1 is pin-compatible with the ADuM1401.