MAX8556 Datasheet

• 1.425V to 3.6V Input Voltage Range
• Guaranteed 4A Output Current
• ±1% Output Accuracy Over Load/Line/Temperature
• 100mV Dropout at 4A Load (typ)
• Built-In Soft-Start
• 800µA (typ) Operating Supply Current
• 150µA (max) Shutdown Supply Current
• Short-Circuit Current Foldback Protection
• Thermal-Overload Protection
• ±10% Power-OK (MAX8556)
• Fast Transient Response
• 16-Pin Thin QFN (5mm x 5mm) Package

• Automated Test Equipment (ATE)
• Base Stations
• Networking
• Optical Modules
• Point-of-Load Supplies
• Servers and Storage Devices

The MAX8556 low-dropout linear regulators operate from input voltages as low as 1.425V and are able to deliver up to 4A of continuous output current with a typical dropout voltage of only 100mV. The output voltage is adjustable from 0.5V to V_IN - 0.2V.

Designed with an internal p-channel MOSFET pass transistor, the MAX8556 maintain a low 800µA typical supply current, independent of the load current and dropout voltage. Using a p-channel MOSFET eliminates the need for an additional external supply or a noisy internal charge pump. Other features include a logic-controlled shutdown mode, built-in soft-start, short-circuit protection with foldback current limit, and thermal-overload protection. The MAX8556 features a POK output that transitions high when the regulator output is within ±10% of its nominal output voltage.

The MAX8556 are available in a 16-pin thin QFN 5mm x 5mm package with exposed paddle.