MAX5477 Datasheet

• Power-On Recall of Wiper Position from Nonvolatile Memory
• EEPROM Write Protection
• Tiny 3mm x 3mm x 0.8mm Thin QFN Package
• 70ppm/°C End-to-End Resistance Temperature Coefficient
• 10ppm/°C Ratiometric Temperature Coefficient
• Fast 400kbps I²C-Compatible Serial Interface
• 1µA (max) Static Supply Current
• Single-Supply Operation: +2.7V to +5.25V
• 256 Tap Positions per Potentiometer
• ±0.5 LSB DNL in Voltage-Divider Mode
• ±1 LSB INL in Voltage-Divider Mode

• Liquid-Crystal Display (LCD) Contrast Control
• Low-Drift Programmable-Gain Amplifiers
• Mechanical Potentiometer Replacements
• Volume Control

The MAX5477 nonvolatile, dual, linear-taper, digital potentiometers perform the function of a mechanical potentiometer, but replace the mechanics with a simple 2-wire digital interface. Each device performs the same function as a discrete potentiometer or variable resistor and has 256 tap points.

The devices feature an internal, nonvolatile EEPROM used to store the wiper position for initialization during power-up. A write-protect feature prevents accidental overwrites of the EEPROM. The fast-mode I²C-compatible serial interface allows communication at data rates up to 400kbps, minimizing board space and reducing interconnection complexity in many applications. Three address inputs allow a total of eight unique address combinations.

The MAX5477 provide three nominal resistance values: 10kΩ (MAX5477). The nominal resistor temperature coefficient is 70ppm/°C end-to-end and 10ppm/°C ratiometric. The low temperature coefficient makes the devices ideal for applications requiring a low temperature- coefficient variable resistor, such as low drift, programmable gain-amplifier circuit configurations.

The MAX5477 are available in 16-pin 3mm x 3mm x 0.8mm TQFN and 14-pin 4.4mm x 5mm TSSOP packages. These devices operate over the extended -40°C to +85°C temperature range.