MAX181 Datasheet

• 12-Bit Resolution, ±1/2 LSB Linearity
• Single-Ended 1-of-6 Multiplexer (MAX181)
• Built-In Track-and Hold
• 100kHz Sampling Rate
• DC and Dynamically Tested
• Internal 25ppm/°C Voltage Reference
• Each Channel Configurable for Unipolar (0V to +5V) or Bipolar (-2.5V to +2.5V) Input Range
• Each Channel Configurable for Single-Ended or Differential Inputs
• Fast 8-/16-Bit µP Interface
• +5V and -12V to -15V Supply Operation
• 110mW Power Consumption

• Automated Test Equipment (ATE)
• Digital Signal Processing (DSP)
• High-Accuracy Process Control
• High-Speed Servo Loops

The MAX181 are complete 12-bit Data Acquisition System (DAS) which combine 6 channel input multiplexer, high bandwidth Track-and-Hold (T/H), low-drift zener reference, and flexible microprocessor (µP) interface with high conversion speed and low power consuption. The MAX180/MAX181 can be configured by a µP for unipolar or bipolar conversions and single-ended or differential inputs. Both devices sample and digitize at 100kHz throughout rate and feature a fast 8- or 16-bit µP interface.

The MAX181 has 6 analog input channels. The MAX181 brings out both the multiplexer output and ADC input to separate pins, allowing a programmable gain amplifier to be inserted between the MUX and the ADC.

The systems allow the user to choose between an internal or an external reference. Furthermore, the internal reference value and the offest can be adjusted, allowing the overall system gain and offset errors to be nulled. The multiplexer has high impedence inputs, simplifying analog drive requirements.