MAX17613C Datasheet

• Robust Protection Reduces System Downtime
  • Wide Input-Supply Range of +4.5V to +60V
  • Hot Plug-in Tolerant without TVS up to 35V Input Supply
  • Negative Input Tolerance up to -65V
  • Low R_ON 130m Ω (typ)
  • Reverse Current-Blocking Protection
  • Thermal Overload Protection
  • Programmable Startup Blanking Time
  • Extended -40°C to +125°C Temperature Range
  • MAX17613C Enables Reverse Voltage Protection
• Flexible Design Options Enable Reuse and Less Requalification
  • Adjustable OVLO and UVLO Thresholds
  • Programmable Forward Current Limit: 0.15A to 3A with ±3.5% Accuracy
  • Accuracy Over Full Temperature Range
  • Programmable Overcurrent Fault Response: Autoretry, Continuous, and Latchoff Modes
  • Smooth Current Transitions
• Saves Board Space and Reduces External BOM Count
  • 20-Pin, 4mm x 4mm, TQFN-EP Package
  • Integrated FETs
• UL 2367 Recognized, File No. E211395
• IEC 62368-1 Certified

• Condition Monitoring
• Factory Sensors
• Industrial Applications such as PLC, Control Network Modules, Battery-Operated Modules
• Process Instrumentation
• Sensor Systems
• Weighing and Batching Systems

The Olympus series of ICs is the industry's smallest and most robust integrated system protection solution. The MAX17613C adjustable overvoltage and overcurrent protection devices are ideal to protect systems against positive and negative input voltage faults up to +60V and -65V, and feature low 130m Ω (typ) R_ON FETs.

The adjustable input overvoltage protection range is 5.5V to 60V and the adjustable input undervoltage protection range is 4.5V to 59V. The input overvoltage-lockout (OVLO) and undervoltage-lockout (UVLO) thresholds are set using external resistors. Additionally, the devices offer an internal input undervoltage threshold at 4.2V (typ).

The devices feature programmable current-limit protection up to 3A; hence, controlling the inrush current at startup while charging large capacitors at the output. The current-limit threshold is programmed by connecting a resistor from the SETI pin to GND. When the device current reaches the programmed threshold, the device prevents further increases in current by modulating the FET resistance. The devices can be programmed to behave in three different ways under current-limit condition: autoretry, continuous, or latchoff modes. The voltage appearing on the SETI pin is proportional to the instantaneous current flowing through the device and can be read by an ADC.The devices offer a programmable startup blanking time that enables charging the large capacitors connected at the output.

MAX17613C block current flowing in the reverse direction (i.e., from OUT to IN). The devices feature thermal shutdown protection against excessive power dissipation.

The devices are available in a small, 20-pin (4mm x 4mm) TQFN-EP package and operate over the -40°C to +125°C extended temperature range.