DG202 Datasheet

• Guaranteed ±4.5V to ±18V Operation
• No V_L Supply Required
• Nonlatching with Supplies Turned Off and Input Signals Present
• CMOS and TTL Logic Compatible
• Monolithic, Low-Power CMOS Design

• Analog Multiplexers
• Automatic Test Equipment
• Communication Systems
• PBX, PABX
• Programmable Gain Amplifiers
• Sample/Holds

The DG202 are normally open, quad single-pole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with power supplies ranging from ±4.5V to ±18V. Maxim guarantees that these switches will not latch up if the power supplies are disconnected with input signals still connected.

The DG202 are similar to the DG201 except for inverted control inputs. All devices have guaranteed break-before-make switching, as well as essentially constant on-resistance over the analog signal range. All switches conduct current in either direction and add no offset to the output signal.

Compared to the original manufacturer's products, Maxim's DG202 consume very little power, making them better suited for portable applications. Maxim has also eliminated the need for the third logic power supply (V_L) that is required for the operation of the original manufacturer's DG212 without sacrificing compatibility.