LTM4682 Datasheet

• Quad Digitally Adjustable Analog Loops with Digital Interface for Control and Monitoring
• Wide Input Voltage Range: 4.5V to 16V
• Output Voltage Range: 0.7V to 1.35V
• ±0.5% DC Output Accuracy at 0.75V
• ±4.5% Current Readback Accuracy: 0°C to 125°C
• Optimized for Low Output Voltage Ranges
• 400kHz PMBus-Compliant I²C Serial Interface
• Supports Telemetry Polling Rates Up to 125Hz
• Integrated 16-Bit ΔΣ ADC
• Parallel and Current Share Multiple Modules
• 15mm × 22mm × 5.71mm BGA Package

• Multi-Rail Processor Power, Configurable Core Power

The LTM^®4682 is a quad 31.25A or single 125A step-down power μModule^® (power micromodule) DC/DC regulator featuring remote configurability and telemetry monitoring of power management parameters over PMBus. The LTM4682 is comprised of digitally programmable analog control loops, and is optimized for higher bandwidth and transient response.

The LTM4682’s 2-wire serial interface allows outputs to be margined, tuned, and ramped up and down at programmable slew rates with sequencing delay times. True input current sense, output currents, output voltages, output power, temperatures, uptime, and peak values are readable. Custom configuration of the EEPROM contents is not required. At start-up, output voltages, switching frequency, and channel phase angle assignments can be set by pin-strapping resistors. The LTpowerPlay^® graphical user interface (GUI), the DC1613A USB-to-PMBus converter, and evaluation kits are available.

The LTM4682 is offered in a 15mm × 22mm × 5.71mm BGA package available with an SnPb or a RoHS-compliant terminal finish.