LTM4606 Datasheet

Ultralow EMI 28VIN, 6A DC/DC μModule Regulator

Part No.:
LTM4606
Manufacturer:
Linear Technology
Page:
28 Pages
Size:
1510 KB
Views:
1
Update Time:
2024-12-09 10:11:07

LTM4606 DataSheet Applicable Part

Part No. In Stock Price Packaging SPQ Marking MSL Pins Temp Range Package Description
SPQ:Standard Pack Quantity;MSL:Moisture Sensitivity Level

LTM4606 DataSheet PDF

LTM4606 Features

  • Complete Low EMI Switch Mode Power Supply
  • Wide Input Voltage Range: 4.5V to 28V
  • 6A DC Typical, 8A Peak Output Current
  • 0.6V to 5V Output Voltage Range
  • EN55022 Class B Certified
  • Output Voltage Tracking and Margining
  • PLL Frequency Synchronization
  • ±1.75% Total DC Error
  • Power Good Output
  • Current Foldback Protection (Disabled at Start-Up)
  • Parallel/Current Sharing
  • Current Mode Control
  • Up to 93% Efficiency at 5VIN, 3.3VOUT
  • Programmable Soft-Start
  • Output Overvoltage Protection
  • –55°C to 125°C Operating Temperature Range (LTM4606MP)
  • SnPb or RoHS Compliant Finish
  • 15mm × 15mm × 2.82mm LGA Package
    15mm × 15mm × 3.42mm BGA Package

LTM4606 Applications

  • ASICs or FPGA Transceivers
  • Telecom, Servers and Networking Equipment
  • Industrial Equipment
  • RF Equipment

LTM4606 Description

The LTM4606 is a complete EN55022 Class B certified noise high voltage 6A switching mode DC/DC power supply. Included in the package are the switching controller, power FETs, inductor, and all support components. The on-board input filter and noise cancellation circuits achieve low noise operation, thus effectively reducing the electromagnetic interference (EMI). Operating over an input voltage range of 4.5V to 28V, the LTM4606 supports an output voltage range of 0.6V to 5V, set by a single resistor. This high efficiency design delivers 6A continuous current (8A peak). Only bulk input and output capacitors are needed to finish the design.

High switching frequency and an adaptive on-time current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking and output voltage margining.

Furthermore, the μModule® regulator can be synchronized with an external clock for reducing undesirable frequency harmonics and allows PolyPhase® operation for high load currents.

The LTM4606 is offered in space saving 15mm × 15mm × 2.82mm LGA and 15mm × 15mm × 3.42mm BGA packages. The LTM4606 is available with SnPb (BGA) or RoHS compliant terminal finish.

LTM4606 Datasheet FAQs