LT8616 Datasheet

Part No.

In Stock

Price

Packaging

SPQ

Marking

MSL

Pins

Temp Range

Package Description

• Wide Input Voltage Range: 3.4V to 42V
• 2.5A and 1.5A Buck Regulators with Separate Inputs
• Fast Minimum Switch On-Time: 35ns
• Ultralow Quiescent Current Burst Mode^® Operation:
  • 6.5μA I_Q Regulating 12V_IN to 5V_OUT and 3.3V_OUT
  • Output Ripple < 15mV
• 180° Out of Phase Switching
  • Adjustable: 200kHz to 3MHz
• Synchronizable: 250kHz to 3MHz
• Accurate 1V Enable Pin Thresholds
• Internal Compensation
• Output Soft-Start and Tracking
• TSSOP Package: Output Stays at or Below Regulation Voltage During Adjacent Pin Short or When a Pin Is Left Floating
• Thermally Enhanced 28-Lead TSSOP and 3mm × 6mm QFN Packages

• Automotive and Industrial Supplies
• General Purpose Step-Down

The LT8616 is a high efficiency, high speed, dual synchronous monolithic step-down switching regulator that consumes only 6.5μA of quiescent current with both channels enabled. Both channels contain all switches and necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while minimizing output ripple. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The enable pins have accurate 1V thresholds and can be used to program undervoltage lockout. Capacitors on the TR/SS pins programs the output voltage ramp rate during startup while the PG pins signal when each output is within 10% of the programmed output voltage. The LT8616 is available in a TSSOP package for high reliability.