ADM8611 Datasheet

• Ultralow power consumption with I_CC = 92 nA (typical)
• Continuous monitoring with no blank time
• Pretrimmed voltage monitoring threshold options
  • 10 options from 2 V to 4.63 V for the ADM8611
• ±1.3% threshold accuracy over full temperature range
• Manual reset input (ADM8611)
• 200 ms (typical) reset timeout
• Active low, open-drain RESET output
• Power supply glitch immunity
• Available in a 1.46 mm × 0.96 mm WLCSP
• Operational temperature range: −40°C to +85°C

• Portable/battery-operated equipment
• Microprocessor systems
• Energy metering
• Energy harvesting

The ADM8611 are voltage supervisory circuits that monitor power supply voltage levels and code execution integrity in microprocessor-based systems. Apart from providing power-on reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by an external push-button through a manual reset input.

The ultralow power consumption of these devices makes them suitable for power efficiency sensitive systems, such as battery-powered portable devices and energy meters.

The features of each member of the device family are shown in Table 9 in the data sheet. Each device subdivides into submodels with differences in factory preset voltage monitoring threshold options. In the range of 2 V to 4.63 V, 10 options are available for the ADM8611.

The ADM8611 can reset on demand through the manual reset input.

The ADM8611 is available in a 6-ball, 1.46 mm × 0.96 mm WLCSP. The ADM8611 are specified over the temperature range of −40°C to +85°C.