ADM2914-EP Datasheet

• Quad UV/OV positive/negative supervisor 
• Supervises up to 2 negative rails
• Adjustable UV and OV input thresholds
• High threshold accuracy over temperature: ±1.5%
• 1 V buffered reference output 
• Open-drain UV and OV reset outputs
• Glitch immnuity
• 62 µA supply current
• 16-lead QSOP package

ENHANCED PRODUCT FEATURES

• Operating temperature range of −55°C to +125°C

• Server supply monitoring
• FPGA/DSP core and I/O voltage monitoring
• Telecommunications equipment
• Medical equipment

The ADM2914-EP is a quad voltage supervisory IC ideally suited for monitoring multiple rails in a wide range of applications.

Each monitored rail has two dedicated input pins, VHx and VLx, which allow each rail to be monitored for both overvoltage (OV) and undervoltage (UV) conditions. A common active low undervoltage (UV) and overvoltage (OV) pin is shared by each of the monitored voltage rails.

The ADM2914-EP includes a 1 V buffered reference output, REF, that acts as an offset when monitoring a negative voltage. The three-state SEL pin determines the polarity of the third and fourth inputs, that is, it configures the device to monitor positive or negative supplies. 

The device incorporates an internal shunt regulator that enables the device to be used in higher voltage systems. This featurer equires a resistor to be placed between the main supply rail and the V_CC pin to limit the current flow into the V_CC pin to no greater than 10 mA. The ADM2914-EP uses the internal shunt regulator to regulate V_CC if the supply line exceeds the absolute maximum ratings.

The ADM2914-EP offers a latching overvoltage output that can be cleared by toggling the LATCH input pin.

The ADM2914-EP is available in a 16-lead QSOP package. The device operates over the extended temperature range of −55°C to +125°C.

Additional application and technical information can be found in the ADM2914 data sheet.