ADF4118 Datasheet

• ADF4118: 3.0 GHz
• +2.7 V to +5.5 V Power Supply
  •  ADF4118: 32/33
• Separate V_P Allows Extended Tuning Voltage in 3V Systems
• 3-Wire Serial Interface
• Digital Lock Detect
• Power Down Mode
• Fastlock Mode

• Base stations for wireless radio(GSM, PCS, DCS, CDMA, WCDMA)
• Wireless handsets(GSM, PCS, DCS, CDMA, WCDMA)
• Wireless LANs
• Communications test equipment
• CATV equipment 

The ADF4118 are frequency synthesizers which can be used to implement local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. They consist of a low-noise digital PFD (Phase Frequency Detector), a precision charge pump, a programmable reference divider, programmable A and B counters and a dual-modulus prescaler (P/P+1). The A (5-bit) and B (13-bit) counters, in conjunction with the dual modulus prescaler (P/P+1), implement an N divider (N= BP+A). In addition, the 14-bit reference counter (R Counter), allows selectable REF_IN frequencies at the PFD input. A complete PLL (Phase-Locked Loop) can be implemented if the synthesizer is used with an external loop filter and VCO (Voltage Controlled Oscillator).

Control of all the on-chip registers is via a simple 3-wire interface.

The devices operate with a 2.7V (± 10%) or 5V (± 10%) power supply and can be powered when not in use.